|
Antifoams
|
| NON
SILICONE TYPE |
| Antifoam
NS |
Non-silicone
defoamer. Cost efficient antifoam, defoamer which contains no silicone or
silicates. Prevents or reduces foam in all dyeing and finishing processes.
Cold water dispersible. |
| Antifoam
PJ New |
High Quality
non silicone defoamer. Prevents or reduces foam in all dyeing and finishing
processes. Suitable for high turbolebce systems (Jet...) |
| SILICONE
TYPE |
Antifoam
R 100 |
A silicone emulsion for use in antifoaming
and defoaming in a wide range of textile applications. ANTIFOAM R 100 is
effective in preventing foam buildup in an open beck. |
Antifoam
R 200 |
A more concentrated form
of ANTIFOAM R 100. |
| Buffers |
| Buffer
5 |
Acid buffer pH 5 - 5,5 for dyeing of
PES and PES/CO and acid enzymatic cellulase treatment. |
| Buffer
DEN |
Acid buffer pH 5 - 5,5 with dispersing
properties on denim treatment with enzimes. |
| Novacid
S |
Acid donor on nylon and blends with acid
dyes. |
| Buffer
TR |
Buffered alkaline system for dyeing cotton and cellulosic
fibres with reactive dyestuffs. Optimal pH control. |
| Carriers |
| Chemcar
A |
Carrier for dyeing polyester fibres,
with powerful migration and levelling properties at H.T. conditions. Low
odour,low foaming and ecologyc.
(Specially recommended in PES/CO/Lycra blends ). |
| Chemcar
PC |
Carrier
for dyeing on PES and blends at low temperature (100 °C). |
| Enzimes |
| Novalase
HT/12 |
High
temperature stable enzime desizing agent from bacilus licheniformis.
120 KNU/g |
| Novalase
LT/56 |
Low
temperature enzime desizing agent from bacilus subtilis.
560 KNU/g |
| Novastone
Super Liq. |
Acid
cellulase for denim stonewashing. Highly concentrated product. |
| Novastone
L |
Antipilling
enzime.Improves look and hand. Better covering power of dead cotton |
| Novastone
WO |
Protease
enzime for silk and wool treatments. |
| Novastone
T-Grains |
Neutral
cellulase in powder form for denim stonewashing. |
| Novastone
T Powder |
Acid
cellulase for denim treatment including buffer and dispersing agent. |
| Oxitase
100 |
Catalase
for removing peroxide in textile process. |
| Dyeing
ass., levelers, retarders |
| ANTIPRECIPITANTS |
| Novogen
912 |
Outstanding
migrating agent for disperse, premetallized and cationic dyes on synthetic
fibers and wool.Used as an anti-precipitant in differential dyeing with
acid,disperse and cationic dyes in one bath. ( 100% AS ). |
| Novopol
SE550 |
An
anti-precipitant for use with acid,disperse or cationic dye combinations.
NOVOPOL SE 550 is also excellent as a retarding and levelling agent for
acid dyes on wool. (100% AS). |
| CATIONIC
RETARDERS |
| Divegal
BF 50 |
A
combination retarding and levelling agent for use with cationic dyestuffs
on acrylic fibers. It is also effective on acrylic/wool blends. |
| Divegal
MR Conc. |
Migrating
agent for cationic dyes on acrylic and modacrylic fibers. |
| DISPERSING
AGENTS |
| Dispersolo
WS |
Anionic
dyeing assistant in solid form. Used for pasting of disperse dyestuffs.
Dye dispersions are characterized by extremely small particle size. Prevents
agglomeration of dye particles during the entire dyeing cycle and minimizes
risk of specking and poor crockfastness. |
| Dispersolo
R 100 |
A
low foaming dispersing and leveling agent for dyeing process with disperse
dyes at H.T. (100% AS). |
| LEVELLING
AGENTS |
| Dispersolo
AS |
Anionic
dyeing assistant which gives outstanding transfer and leveling of acid dyes
on nylon and wool. It has excellent barré and streak-covering properties.
|
| Dispersolo
KE |
A
leveling agent which improves the migration of acid dyes on nylon fibers
and direct dyes on cotton. DISPERSOLO KE provides outstanding transfer of
acid dyes. |
| Dispersolo
JET |
Low foaming, nonionic/anionic
dyeing assistants and leveling agents that have excellent wetting properties
on synthetic and natural fibers. DISPERSOLO JET may be used as a noncarrier
system in the dyeing of polyester fibers under pressure. |
| Fabric
lubricants |
| Novolube
Aes conc. |
Anionic
leveling agents. Promote migration and leveling of direct, disperse and
reactive dyes on cotton and polyester/cotton blends. Provide enhanced dispersion
stability with fine particle size. Effective lubricants which minimize rope
marks. |
| Novolube
Msf |
An
anionic lubricant for use in dispersed dyebath to enhance dispersion stability
and fiber lubrication. Lecithin derivative. |
| Novolube
140 |
Anticreasing,
dispersing and levelling agent for PES dyeing. No foaming product. |
| Fixing
agents |
| Novofix
CF |
Cationic
derivative of organic base. Substantive fixing agent to prevent bleeding
of direct colours.
Improves fastness to wet environment. Used alone,in dyebath rinse,or with
resins. |
| Novofix
Bf extra conc. |
Free
of formaldehyde. Improves wet fastness of direct and reactive dyestuffs
with minimum change of shade. No negative effect on light fastness. |
| Penetrants
and wetting agents |
| Deterwet
Kd |
A
low foaming, nonionic/anionic very fast wetting agent. It is especially
recommended for use in continuous process. |
| Deterwet
Vk liquid |
Highly
active wetting agent for desizing, scouring and bleaching, in continuous
and exhaustion methods. |
| Deterwet
FSE |
A
very fast anionic wetting agent for use in scouring and dyeing all fibers.
It is compatible with all dye types and has excellent dispersing properties.
Effective at room temperature because of its cold water solubility. |
| Deterwet
NA/75 |
Mercerizing
penetrant. |
| Preparation,
scourcing and bleaching assistants |
| Deterpal
Hed |
Desizes,scours
and bleaches simultaneously. Used on cottons and cellulosic fibers. |
| Deterpal
160 |
Multi-purpose
products which may be used as low temperature scours,wetters for desizing
and bleaching or soaping agents for fiber reactive colours. |
| Perox
Fag |
Extremely effective liquid
stabilizer for hydrogen peroxide bleach baths. It is a complete replacement
for sodium silicate, eliminating the problems of silicate deposits on equipment
and fabric. |
| Deterlene
Pc |
Non-ionic detergent and
wetting agent. Penetrant and leveling agent for synthetics and cotton. Good
general purpose non-ionic scouring detergent. Reccomended on discontinuous
process. |
| Detersolv AF/D |
An excellent scouring agent
for use in removing lubricants and spinning oils from fibers. The combination
of solvent and detergent makes it very effective for removing oil and grease
stains from goods in batch or pad-batch operations.Also very effective for
removing unfixed dyes.
Improves crockfastness. |
| Deterpal LA conc. |
Blended nonionic detergent
system. Developed to facilitate rapid removalof knitting or coning lubricants.
Most effective on open width equipment where agitation is at a minimum.
Recommended for wool and blends. |
| Deterpal SD/NF |
Blended nonionic surfactants.
Extremely low foaming detergent systems for removal of oils,lubricants and
foreign materials from polyester double knit fabrics. Low foaming characteristics
make these products suited for equipment where high turbulence is present. |
| Sequestering
agents |
| PREPARATION |
| Permatol
54/P |
Phosphonated anionic salt
complexing agent for alkaline earth metals,with excellent action in preparation
specially in scouring and peroxide bleaching. Excellent silicate dispersing
and anticatalitic action. |
| Permatol
54/P |
Anionic complexing agent
of heavy and alkaline earth metals. Specially recommended for oxidative
processes. |
| DYEING
AND SOAPING |
| Permacol OP |
Acrylic acid derivative.
Ca++ and Mg++ sequestering agent. Dispersing agent for direct reactive,
disperse, sulphur and vat dyestuffs. Any negative effect on metal complex
dyes. For use at all stages of processing, and specially in all kind of
soaping processes. |
| Permacol CP |
Polycarboxilic polimer.
Dispersing and sequestering agent for dyeing, soaping of cellulosic fibers
with direct, reactive, sulphur and vat dyestuffs. |
| Permacol RK |
Dispersing, sequestering
and soaping agent with direct reactive sulphur and vat dyestuffs. |
| Softeners |
| CATIONIC |
| Base CS/100 |
Cationic softener which
may be used on various textile fibers to impart a soft,slick hand. The liquid
form can be incorporated directly into a textile dyebath. (100% AS ). |
| Base k/990 |
Non-yellowing cationic softeners
for use on polyester/cotton blends and acrylic/cotton blends. BASE K/990
is a 100% AS concentrate in solid form. Imparts hydrophility. |
| Base HSC |
Fatty amines. Cationics
designed for maximum "buttery" hand on sweaters and knitwear.
Effective on stretch fabrics and function as lustering agents/softeners
for pile fabrics. (100% AS ). |
| Base MO |
Imidazoline derivative.
It is high activity, substantive cationic softener. For cellulosic fibers
and blends. Applied by exhaustion as a top softener on denim treatment.
( 100% AS ). |
| Base SHG |
Cationic softner which may
be used on various textile fibers to impart a soft and slick hand. It can
be incorporated diirectly into a textile dye bath. It can be diluted at
a low temperary (100°C) |
| Novamin GR |
High performance for napping
articles made of cotton and its blends. |
| Base OT Conc. |
Cationic softener for cellulosic
and syntethic fibers with antistatic properties. |
| Noamin JT |
Non yellowing cationic softener
for napping articles made of cotton and its blends. It can be applied during
bleaching, improves a soft hand and a good hidrofility. |
| NON
IONIC |
| Noamin WG |
Unique concentrated liquid
self-finish. Used as the major softening component in pre-cure and post-cure
permanent press processing. Provides full-bodied softness with surface slickness
and luster. Effectively reduces "boardiness" on post-cured fabric.
Improves fabric drape and surface touch after calendering wash/wear and
pre-cure fabrics. |
| ANIONIC |
| Base NS Conc. |
Non-yellowing anionic softeners
for using on various textile fibers. Compatible with optical brighteners
can be applied during bleaching. Improves fabrics mechanical properties
such as lubricating. Good anti-static qualities. |
| Textile
specialties |
| Oxidol 432 |
An economical,highly efficient
and ecologically desirable oxidizing agent for sulfur and vat dyes. Can
be used either on continuous or batch dyeing operations. |
| Oxidol RE |
Avoids reduction of reactive
dyes. A liquid, ecologic replacement for sodium m-nitro benzen sulphonic
acid,Sodium salt. Used in dyeing and printing. |
| Oxidol PTR Granules |
Oxidative agent. Avoids
reduction of reactive dyestuffs. |
| Deterwet FW |
De-aerating and wetting
agent for exhaustion dyeing. No ionic/anionic. |
| Deterwet HT |
De-aerating and wetting
agent for exhaustion dyeing and in H.T. system. No ionic/anionic. |
| Microfinish TFX conc |
Amino functional silicone
microemulsion for continuous processes. Improves sewability and softness.
Non yellowing. |
| Microfinish TA conc |
Amino functional silicone
microemulsion for exhaustion method. Very good handle.
Improves elasticity and sewability. |
| Base Microfinish Conc. |
Amino functional silicone
microemulsion prepared for dilution. |
| Microfinish W |
Cyclic microemulsion for
cellulosic fibers. Non yellowing, special handle amd improves hidrofility. |
| Microfinish HD |
Hydrophilic silicone microemulsion. Suitable
for exhusting and pad process. |
| Protex ZIP |
Preparation and dyeing assistant on garment.
Corrosion inhibitor for metals. Avoids spots caused from zip, rivets and
bottons, during dyeing or washing of garments |
| Printing
Specialities |
| Chemcar SH-T |
Carrier for disperse dyestuffs on PES
100%. Steaming H.T. conditions. |
| Novocryl S-P |
Acrylic binder with 60% solid contains.
Soft hand. Curing 4 - 5 min. at 150° C. |
| Novocryl S-VA |
Acrylic / Vinilic binder with 50% solids. |
| Novocryl S-B |
Styrene / Butadiene binder. Soft handle.
Curing 130 - 150° C. |
| Novofix ST |
Catalyst for pigment printing at 125
°C. |
| Novocol AP/P |
Water soluble adhesive. Screen and rotary
machine. PVA 13% . |
| Novocol AP/Z |
Water soluble adhesive. Screen and rotary
machine. PVA 18% . |
| Detersol R50 |
Washing off reactive dyestuffs on cotton
and acid dyestuffs on polyamide. |
| Detersolv S-797 |
Detergent. Removes impurities and residual dyestuffs
from the adhesive in tables and machines. |
| Detersolv S-PA |
Detergent. Removes permanent adhesives
and thermoplast from tables and machines.
No negative effect on blankets |
| Dispersolo VP |
Washing off direct dyestuffs. |
| Dispersolo ER 80 |
Strong dispersing agent. Washing off disperse
dyestuffs. |
| Dispersolo SE Liq. |
Dispersing agent washing off disperse
dyestuffs. |
| Oxidol PTR Granules |
Oxidative agent. Avoids reduction of
reactive dyestuffs. |
| Oxidol RE |
Oxidative agent. Avoids reduction of
reactive dyestuffs. Same activity than OXIDOL PTR GRANULES. |
| Antifoams SFR |
Antifoam. No silicone contains. Soluble
dyestuffs. |
| Antifoams R 100 |
Silicone based antifoam.
For all kind of pigment pastes. |
| Novolube S-LU |
Lubricating, wetting and
flowing agent for all kind of pigment pastes. |
| Novasil S-100 |
Silicone oil softener. Pigment
printing. |
| Novasil S-AS |
Softening siliconed agent
for pigment printing. |
| Detersolv S-AC |
Acid and direct dyestuffs
solubilising agent. |
| Detersolv S-BD |
Acid and direct dyestuffs
solubilising agent. |
| Novolube S-WL |
Wetting and leveler agent
for Lycra / Poliamyde printing. “Antifrosting”. |
| Novolube S-50 |
Lubricant and leveler for
printing pastes. Antiblocking of screens. |
| Novofix S-30 |
Fixing agent for acid dyes. |
| Novofix CF |
Fixing agent for direct and
reactive. |
| Novofix BF Conc. |
Fixing agent for direct
and reactive. Without formaldehyde. |
| Novapret MF |
Fixing agent for pigments
60 % solids. |
| Novapret LF |
Fixing agent. Low formaldehyde.
Used in pigments 75% solids. |
| Fabric
printing |
| Bianco S-PR |
White ready to use. High
opacity. Soft hand. On all type of printing machinery.
Curing 5 min. at 150° C. |
| Bianco S-OP |
White ready to use. Medium
opacity. More economic. Soft hand.
On all type of printing machinery. Curing 5 min. at 150° C. |
| Bianco S-PP |
White prepared to be coloured
with pigments.Appropriate for polipropilenic fibres.
Curing 4 min. at 120 - 125° C. |
| Printlake S-110 |
Lake ready to use. Soft hand. Curing
5 min. at 150° C. |
| Printlake S-T Extra |
Very elastic base for colour. Very soft
hand. Curing 5 min. at 150° C. |
| Printlake S-AG |
Silver effect. Possible
to colour with pigments. |
| Printlake S-AGR |
Silver effect for rotary machine. |
| Printlake S-AUR77 |
Gold effect for rotary machine. It doesn’t
go rusty. |
| Emulsion S-WS |
Emulsifier water / solvent. |
| Clear S-GP |
Synthetic thickening agent for pigment
printing. It can be used in emulsion and in aequeous system. Aprox. 30 -
32 gr/Kg. |
| Clear S-PT |
Synthetic thickening agent for pigment
printing. It can be used in emulsion and in aqueous system. Aprox. 18 gr/Kg
. |
| Print S-VP |
Readily thickens pigment printing pastes
to give sharper, brighter and more uniform prints. Combined in formulation
with CLEAR S-GP . |
| Nero Acido pro |
Ready to use. Acid black for printing
profile. |
| Novoprint S-Rongeant |
Ready to use. Paste for “Rongeant”
effect. |
| Garment
and T-Shirt printing |
| Bianco S-A |
Brilliant and elastic white. High opacity.
Curing at low temperature. |
| Bianco S-AV2 |
Brilliant and elastic white. High opacity.
Curing at low temperature. Shaded. |
| Bianco S-B |
Brilliant and elastic white. Maximum
opacity.
Curing at low temperature. |
| Printlake S-25 |
Brilliant and elastic lake for colours
with very high opacity. Curing at low temperature. |
| Novoprint S-Car |
Adhesive base for transfer paper. |
| Printlake S-PF |
Three dimensional printing. Brodery effect. |
| Printlake S-HO |
Ready to use print paste, in pigment
printing high opacity. |
| Printlake S-trans |
Transparent, elastic, base. High opacity. |
| Novolube GR |
Lubricating, wetting and flowing agent
for pigment pastes. No negative effect in fastness. |
| Novacryl AB |
Acrylic binder self-curing. |
| Novoprint JE |
Base for printed “Stone Wash” effect. |
| Novoprint S-FD |
Ready to use print paste in pigment printing.
Curing at low temperature. |
| Novoprint S-GL |
Elastic base for glitter. Curing at low
temperature. |
| Novoprint S-Aur |
Elastic base for gold and silver effects.
Curing at low temperature. |
| Novoprint S-TP |
Ready to use print paste in pigment printing.
Soft hand. Curing 4 - 5 min. at 150° C . |
| Novocol PE |
Permanent adhesive for garment printing. |
| Novoplast Series |
Brand of dyes, PLASTISOL type. “Flash
curing”. |
| Printlake S-Aur 80 |
Gold effect. It doesn’t go rusty. |
| Printlake S-AG70 |
Silver effect. It doesn’t go rusty. |
| Printlake S-PEA |
Prepared base for colouring a “peach
skin” effect. It may be used for flatbed and rotary machines. Drying
at 170°C is recommended. |
| Bianco S-BM |
Shiny, elastic covering
white. It must be cured for 3 minutes at 150°C. |
| Printlake S-BT |
Shiny, elastic covering
lacquer for colouring. It must be cured for 3 minutes at 150°C. |
| Printlake S-Foam 4 |
Three dimensional printing.
Brodery effect. It can be used in steaming procedures. High swelling power.
It stands temperatures of 170° C . |
| Printlake S-Foam |
Three dimensional printing.
Brodery effect. It can be used in steaming procedures. Less swelling power.
It stands temperatures of 170° C. Excellent solidity. |